#SPARK PLUG SOCKET SIZE FREE#

And the torque spec was 20N/m or 18 ft/lbs, I believe on the plugs. And of course, use anti-seize on your threads and a dielectric grease on the boot. Eco-Clean spark plug has reduced emissions and improved fuel economy. Environmentally friendly plug from Champion, leader in small engine spark plugs. For Lawn and Garden Applications with 4-Cycle Engines. While you can get extensions that turn 90 degrees (and I used one yesterday), try to hit the plug at the most straight on angle possible. Replaces Champion Spark Plugs RC12YC, RC14YC, BKR5EY and BKR5E-11. Extensions made my life much easier yesterday. Same thing putting it back in except for initially threading the plug by hand. Once I had placed the socket on the plug, I could stand comfortably and pull it right out.

The biggest help for me was this forum, but the next biggest help was a ton of wobble-extensions. Downstream are in the mail and will be here tomorrow. I bought mine on Amazon and got them with a $4 rebate each, so it only ended up being 21 bucks. You can get a single magnetic 5/8-inch socket that’s 3/8-inch drive with a six-inch extension and a handy knurled band to keep you from busting your knuckles. All of the odd cylinders were misfiring and the truck sounded like death. If you can’t get a straight shot at a spark plug, a swiveling flex-head spark plug socket from Gearwrench is the one you need. Fox spark plugs arent exactly hard to reach. 5/8' I dont feel the need to buy one for the Fox, since the only thing different about it is the rubber inside to hold the plug. Check for cracks in the porcelain insulator (if any are found, the plug cannot not be used).What kind of resistance are you experiencing? Will the boot twist at all, or is it completely stuck on the plug and will not turn or move any direction? I just did my plugs yesterday and also did the plus4's and the difference is huge for me. Re: Spark plug socket size (efritsch) I have a 'spark plug' socket, but its for my Escort. If the gap is incorrect, use the adjuster on the gauge body to bend the curved side electrode slightly until the proper gap is obtained. If the side electrode is not exactly over the center electrode, bend it with the adjuster until it is. The wire should just slide between the electrodes with a slight amount of drag. (See illustration) The gap is checked by inserting the proper thickness gauge between the electrodes at the tip of the plug. The gap between the electrodes should be the same as the one specified on the VECI label.

While you are waiting for the engine to cool, check the new plugs for defects and adjust their gap. Apply dab of antiseeze to threads and run plug in/out several times by hand to spread evenly. Aluminum-head engine should be STONE COLD when replacing plugs. If differences exist between the plug number specified on the emissions label and in the owner’s manual, assume that the emissions label is correct.Īllow the engine to cool completely before attempting to remove any of the plugs. If you REALLY want a rubber-insert inside your existing 14mm, just pop it out of your 9/16 socket and push inside your 14mm. I know the newer trucks use the sp509 instead. However, my 9/16 spark plug socket (OTC 6900, specifically for the 3V 5.4 motor) would not fit I used this wrench on my old 05 truck without issue.

#SPARK PLUG SOCKET SIZE FREE#

When buying spark plugs, check the information found on the Vehicle Emission Control Information (VECI) label located under the hood and in the owner’s manual. Get free shipping on qualified Spark Plug Sockets products or Buy Online Pick Up in Store today in the Tools Department. 2009 - 2014 Ford F150 - Spark plug socket size - The other night I tried to pull a spark plug from my 2010 F150 5.4 motor. Then replace the plugs one at a time so the plug wired do not get mixed up. The best approach when replacing the spark plugs is to purchase the new ones in advance, check the gap, and adjust them if needed.